- kingda XPS - flame retardant board
- kingda xps - The common blue, red, yellow
- kingda xps - Roof extrusion board
- kingda xps - Internal and external wall extrusion
- kingda xps - Cold storage and purification worksho
- kingda xps - Floor heating extrusion board
- kingda xps- Steel structure layer and sandwich ext
- kingda xps - Special shape sheet extrusion board
- Promotion Keywords
Dongguan city, kingda plastic insulation board co., LTD
Contact: manager zhao
Mobile phone: 13509011897
The phone: 0769-88127882
Fax:0769-88128231
Email:2875488916@qq.com
Web site:www.dgkingda.com
Address:Zhongtang town Zhancui Nan di Industrial area
-
Storage thermal insulation construction schemeAccording to the thermal conductivity of XPS extruded insulation board 0.027 and storage requirements for temperature from-20 DEG, as the frozen library by using the following methods:
First, the warehouse wall and roof insulation before doing a layer of gas reservoir. In the past, plastic sheeting was used in construction, and most of the formal cold storage systems were made of cyanide gas;
Two, ground construction method: the ground adopts two layers of 8cm Extrusion board, according to the wrong seam paving
The first waterproof layer (plastic) and Pu XPS extruded boards, each side seam, about 2 cm, and then using polyurethane adhesive sealing requirements, flat polyurethane material Tim plastic extruded board is not higher than XPS.
Three 、 wall panel and top panel construction method
The two layer 8cm board in accordance with staggered Putie surface spraying polyurethane 3 cm
First, a layer of 8cm Extrusion board is directly adhered to the wall, and then 10cm plastic expansion screws are used to fix 3-4 expansion nails per square meter. Then, each side of the Extrusion board is filled with polyurethane. The second layer 8cm
Polyurethane adhesive for extrusion plate. The outer surface of the coating is 3 cm polyurethane as sealing layer.
Thermal insulation construction scheme of high temperature storehouseAccording to the thermal conductivity of XPS extruded insulation board is 0.027 and the temperature requirement of high temperature warehouse is 0 degrees, the following methods are adopted for construction:
First, the warehouse wall and roof insulation before doing a layer of gas barrier, the use of cyanide condensate gas barrier, to prevent the entry of water vapor, water directly into the cold storage insulation effect failure;
Two. Ground construction method
The floor is made of two layers of 5cm extruded board, which is laid on the wrong seam
The first waterproof layer (plastic), a layer of plastic cloth, wall thickness of 0.018, then spread XPS extruded insulation board, each side seam, using polyurethane adhesive sealing requirements, flat polyurethane material Tim plastic extruded board is not higher than XPS.
Three 、 wall panel construction method
The wall panel is made of two layers of 5cm extruded board and laid on the wrong seam
Put a layer of 5cm extruded plate directly pasted on the wall, then 10cm plastic expansion nail fixed by 3-4 per square expansion nail, then each side with extruded plate polyurethane pouring adhesive; second layer 5cm board with polyurethane glue staggered paste.
Four 、 top construction method
The roof construction: put a layer of 8 cm of extruded plate hoisting in I-shaped steel beam, and from inside the 3 cm polyurethane sealing coating.
