kingda xps Roofing

Kingda XPS Extrusion insulation board
Kingda Extrusion board is a kind of high-density rigid foam board made of polystyrene resin and other auxiliary materials and polymer, which is heated by mixing and injected into the catalyst at the same time, and then extruded and extruded. It is referred to as (XPS). This unique closed cell cellular structure to support plate has a rather low water absorption (almost no absorption), low thermal conductivity, high compressive strength, ageing resistance (normal use almost no aging decomposition phenomenon).

Using Kingda board to heat insulation of building roof is superior to other materials:
1., Kingda board of low thermal conductivity, so that it has a very good insulation effect, in the summer to choose the appropriate thickness can reduce the top temperature of more than 20 degrees, not only to improve the comfort of the top floor, but also to save air-conditioning electricity;
2. the waterproof layer is arranged in the insulation layer, so that the waterproof layer obtained sufficient protection, so that the temperature of the surface of the waterproof layer changes significantly reduced, avoiding the waterproof layer due to temperature changes caused by external damage, or man-made impact damage, and the waterproof layer from UV rays, provide good function of waterproof insulation to the building, extend the housing service life.
3. Kingda board not only light and not substantially increase the floor load, and high pressure, even after installation in the floor pedestrian road be nothing difficult.

4. the inverted roof does not need to add exhaust holes, so that the construction becomes simple, and not affected by the climate. It is the most ideal roof insulation system at present.