Building roof insulation

Building roof insulation
The roof of a building that receives the most solar radiation in summer is the roof, and in winter the roof also causes a great deal of room heat loss. So for a green energy-saving building, the roof design is absolutely critical. The houses in hot areas should consider the heat insulation of the roof, and the cold area should take into account the thermal insulation of the roof.
With the Midas plate on the floor roof building insulation is superior to other materials can not match:
Low thermal conductivity plate have the Midas insulation is very good, suitable thickness can make the top temperature reduced by more than 20 degrees in the summer, not only improve the top floor comfort and save energy for air conditioning;
The waterproof layer is arranged in the insulation layer, so that the waterproof layer obtained sufficient protection, so that the temperature of the surface of the waterproof layer changes significantly reduced, avoiding the waterproof layer due to temperature changes caused by external damage, or man-made impact damage, and the waterproof layer from UV rays, provide good function of waterproof insulation to the building, to extend the use of housing life.
We in not only light will not substantially increase the floor load, and high pressure, even after installation in the floor pedestrian road be nothing difficult.
The inverted roof does not need to be provided with an exhaust hole, so that the construction becomes simple and is free from the influence of the climate. It is the most ideal roof insulation system at present.

☆  25 extruded polystyrene board, =40 foamed polystyrene board, =200 aerated concrete, =620 solid clay brick

Construction sequence:

Flat roof: basic cleaning, sloping layer, leveling layer, waterproof layer, insulation board, steel mesh, fine stone concrete and detail treatment, inspection and acceptance, caulking.
Slope roof: basic cleaning, sloping layer, leveling layer, waterproof layer, a smooth, sticky nail insulation board, nail batten, hanging tile, detail processing, inspection and acceptance, water test.